Ürünler

Pepperl Ultrasonik Sensörler
Ultrasonik Sensör Pepperl Fuchs UB2000-F42S-I-V15
3 Aralık 2018
Pepperl Ultrasonik Sensörler
Ultrasonik Sensör Pepperl Fuchs UB2000-F42S-E6-V15
3 Aralık 2018
Tümünü Göster

Ultrasonik Sensör Pepperl Fuchs UB2000-F42S-E7-V15


Sensör
Ultrasonic Sensor
Ultrasonik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Ultrasonic Sensor
Pepperl Fuchs Ultrasonik Sensör
Pepperl Fuchs UB2000-F42S-E7-V15
Pepperl UB2000-F42S-E7-V15

Açıklama

Pepperl Fuchs UB2000-F42S-E7-V15 Ultrasonik Sensör
Pepperl UB2000-F42S-E7-V15 Ultrasonic Sensor

Teknik veriler UB2000-F42S-E7-V15

Ürün Açıklaması
Single head system

 

General specifications
Sensing range 60 … 2000 mm
Adjustment range 90 … 2000 mm
Dead band 0 … 60 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 175 kHz
Response delay approx. 150 ms
Indicators/operating means
LED green solid green: Power on
LED yellow 1 solid: switching state switch output 1
flashing: program function
LED yellow 2 solid: switching state switch output 2
flashing: program function
LED red normal operation: “fault”
program function: no object detected
Electrical specifications
Operating voltage 10 … 30 V DC , ripple 10 %SS
No-load supply current ≤ 50 mA
Input/Output
Synchronization bi-directional
0 level -UB…+1 V
1 level: +4 V…+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
Common mode operation max. 30 Hz
Multiplex operation ≤ 30/n Hz, n = number of sensors
Output
Output type 2 switch outputs NPN, normally open/close selectable
Rated operating current 200 mA , short-circuit/overload protected
Default setting Switch point A1: 90 mm , Switch point A2: 2000 mm , wide sound lobe
Voltage drop ≤ 2.5 V
Repeat accuracy ≤ 0.5 % of switching point
Switching frequency ≤ 2.7 Hz
Range hysteresis 1 % of the set operating distance
Temperature influence ± 1 % of full-scale value
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 … 70 °C (-13 … 158 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 5-pin
Degree of protection IP54
Material
Housing ABS
Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT
Mass 140 g