Ürünler

Ultrasonic Sensor Pepperl Fuchs
Fiber Optik Sensör Pepperl Fuchs SU19.1/102/115
19 Aralık 2018
Pepperl Fuchs Ultrasonic Sensor
Fiber Optik Sensör Pepperl Fuchs SU19.1/110/115
19 Aralık 2018
Tümünü Göster

Fiber Optik Sensör Pepperl Fuchs SU19.1/103/115


Sensör
Fotoelektrik Sensör
Fiber Optic Sensor
Fiber Optik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Fiber Optic Sensor
Pepperl Fuchs Fiber Optik Sensör
Pepperl Fuchs SU19.1/103/115
Pepperl SU19.1/103/115
SU19.1/103/115

Açıklama

Pepperl Fuchs SU19.1/103/115 Fiber Optik Sensör
Pepperl SU19.1/103/115 Fiber Optic Sensor
Fotoelektrik Sensör Pepperl Fuchs SU19.1/103/115
Pepperl Fuchs SU19.1/102/115 Fotoelektrik Sensör
Fiber Optic Sensor SU19.1/103/115 Pepperl-Fuchs
Fiber Optik Sensör SU19.1/103/115 Pepperl-Fuchs

Teknik veriler SU19.1/103/115

Ürün Açıklaması
Classic Series fiber optic sensor with display, slave module, PNP output, fixed cable

 

General specifications
Sensor range up to 150 mm (KLR-C02-2,2-2,0-K146)
Detection range up to 450 mm (KLE-C01-2,2-2,0-K116)
Light source LED
Light type modulated visible red light , 660 nm
Ambient light limit 10000 Lux
Gang mounting maximum 20 units
Functional safety related parameters
MTTFd 500 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Diagnostics indicator 7-segment display
Function indicator LED yellow: static illumination switching state, flashes when falling short of the stability control
Control elements Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization
Electrical specifications
Operating voltage 10 … 30 V DC
Ripple 10 %
No-load supply current ≤ 30 mA
Output
Switching type light/dark on selectable programmable
Signal output 1 PNP, short-circuit protected, open collector
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Voltage drop ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
Switching frequency High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz
Response time High speed mode: 30 µs , Standard mode: 160 µs , High resolution: 2 ms , Automatic: 160 µs ~ 2 ms (choice by the sensor), Glass mode: 2 ms
Repeat accuracy ≤ 0.5 % of adjusted sensor range
Timer function ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 … 999 ms in 1 ms increments
Compliance with standards and directives
Standard conformity
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -10 … 55 °C (14 … 131 °F)
Storage temperature -20 … 70 °C (-4 … 158 °F)
Mechanical specifications
Housing width 9 mm
Housing height 34.5 mm
Housing depth 62.3 mm
Degree of protection IP50
Connection 2 m fixed cable , 1 x 0.25 mm2 , PVC
Material
Housing PC
Mass 45 g