Sensör
Fotoelektrik Sensör
Fiber Optic Sensor
Fiber Optik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Fiber Optic Sensor
Pepperl Fuchs Fiber Optik Sensör
Pepperl Fuchs SU18/16/35/40a/110/115a/126a
Pepperl SU18/16/35/40a/110/115a/126a
SU18/16/35/40a/110/115a/126a
Pepperl Fuchs SU18/16/35/40a/110/115a/126a Fiber Optik Sensör
Pepperl SU18/16/35/40a/110/115a/126a Fiber Optic Sensor
Fotoelektrik Sensör Pepperl Fuchs SU18/16/35/40a/110/115a/126a
Pepperl Fuchs SU18/16/35/40a/110/115a/126a Fotoelektrik Sensör
Fiber Optic Sensor SU18/16/35/40a/110/115a/126a Pepperl-Fuchs
Fiber Optik Sensör SU18/16/35/40a/110/115a/126a Pepperl-Fuchs
Ürün Açıklaması |
Fiber optic sensor for glass fiber optics and plastic fiber optics |
General specifications | ||
Sensor range | up to 460 mm (KLR-C02-2,2-2,0-K146) | |
Detection range | up to 1500 mm (KLE-C01-2,2-2,0-K116) | |
Light source | LED | |
Light type | modulated visible red light , 640 nm | |
Ambient light limit | 10000 Lux | |
Functional safety related parameters | ||
MTTFd | 690 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control | |
Control elements | Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function – timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode – Standard, High Power, Ultra |
|
Electrical specifications | ||
Operating voltage | 10 … 30 V DC | |
Ripple | 10 % | |
No-load supply current | ≤ 30 mA | |
Output | ||
Pre-fault indication output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected | |
Switching type | light/dark on, switchable | |
Signal output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected | |
Switching voltage | max. 30 V DC | |
Switching current | max. 100 mA , resistive load | |
Voltage drop | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA | |
Switching frequency | Standard mode: 3 kHz , High power mode: 1 kHz , Ultra mode: 100 Hz | |
Response time | Standard mode: 160 µs , High power mode: 500 µs , Ultra mode: 5 ms | |
Repeat accuracy | ≤ 0.5 % of adjusted sensor range | |
Compliance with standards and directives | ||
Standard conformity | ||
Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -10 … 55 °C (14 … 131 °F) | |
Storage temperature | -20 … 70 °C (-4 … 158 °F) | |
Mechanical specifications | ||
Housing width | 9 mm | |
Housing height | 34.5 mm | |
Housing depth | 62.3 mm | |
Degree of protection | IP50 | |
Connection | 200 mm, PVC cable with M8 connector, 4-pin | |
Material | ||
Housing | PC | |
Mass | 45 g |