Ürünler

Pepperl Ultrasonik Sensörler
Nirengi Sensör Pepperl Fuchs OQT400-R201-2EP-IO-V31
31 Aralık 2018
Ultrasonic Sensor Pepperl Fuchs
Nirengi Sensör Pepperl Fuchs OQT400-R201-EP-IO-V3
31 Aralık 2018
Tümünü Göster

Nirengi Sensör Pepperl Fuchs OQT400-R201-EP-IO-0,3M-V3


Sensör
Fotoelektrik Sensör
Nirengi Sensör
Photoelectric Triangulation Sensor
Fotoelektrik Nirengi Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Nirengi Sensör
Pepperl Fuchs Triangulation Sensor
Pepperl Fuchs Photoelectric Triangulation Sensor
Pepperl Fuchs OQT400-R201-EP-IO-0,3M-V3
Pepperl OQT400-R201-EP-IO-0,3M-V3
OQT400-R201-EP-IO-0,3M-V3

Açıklama

Pepperl Fuchs OQT400-R201-EP-IO-0,3M-V3 Fotoelektrik Nirengi Sensör
Pepperl OQT400-R201-EP-IO-0,3M-V3 Photoelectric Triangulation Sensor
Fotoelektrik Sensör Pepperl Fuchs OQT400-R201-EP-IO-0,3M-V3
Pepperl Fuchs OQT400-R201-EP-IO-0,3M-V3 Fotoelektrik Sensör
Triangulation Sensor OQT400-R201-EP-IO-0,3M-V3 Pepperl-Fuchs
Nirengi Sensör OQT400-R201-EP-IO-0,3M-V3 Pepperl-Fuchs

Teknik veriler OQT400-R201-EP-IO-0,3M-V3

Ürün Açıklaması
Measuring sensor with multiple switch points

 

General specifications
Detection range 40 … 400 mm
Detection range min. 40 … 100 mm
Detection range max. 40 … 400 mm
Adjustment range 100 … 400 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Black/White difference (6 %/90 %) < 5 %
Diameter of the light spot approx. 15 mm at a distance of 400 mm
Angle of divergence approx. 2.5 °
Ambient light limit EN 60947-5-2 : 70000 Lux
Functional safety related parameters
MTTFd 600 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on – power on
flashing (4Hz) – short circuit
flashing with short break (1 Hz) – IO-Link mode
Function indicator LED yellow:
constantly on – switch output active
constantly off – switch output inactive
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage 10 … 30 V DC
Ripple max. 10 %
No-load supply current < 25 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Device profile Identification and diagnosis
Smart Sensor type 0
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data witdh Process data input 2 Bit
Process data output 2 Bit
SIO mode support yes
Device ID 0x111811 (1120273)
Compatible master port type A
Output
Switching type The default setting is:
C/Q – Pin4: NPN normally open, PNP normally closed, IO-Link
Signal output 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 217 Hz
Response time 2.3 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Approvals and certificates
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -40 … 60 °C (-40 … 140 °F) , fixed cable
-20 … 60 °C (-4 … 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature -40 … 70 °C (-40 … 158 °F)
Mechanical specifications
Housing width 15 mm
Housing height 61.7 mm
Housing depth 41.7 mm
Degree of protection IP67 / IP69 / IP69K
Connection 300 mm fixed cable with M8 x 1, 3-pin connector
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 55 g
Cable length 0.3 m