Ürünler

Ultrasonic Sensor Pepperl Fuchs
Nirengi Sensör Pepperl Fuchs OQT150-R101-2EP-IO-V31
31 Aralık 2018
Pepperl Ultrasonik Sensörler
Nirengi Sensör Pepperl Fuchs OQT150-R101-2EP-IO-V31-L
31 Aralık 2018
Tümünü Göster

Nirengi Sensör Pepperl Fuchs OQT150-R101-2EP-IO-V31-IR


Sensör
Fotoelektrik Sensör
Nirengi Sensör
Photoelectric Triangulation Sensor
Fotoelektrik Nirengi Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Nirengi Sensör
Pepperl Fuchs Triangulation Sensor
Pepperl Fuchs Photoelectric Triangulation Sensor
Pepperl Fuchs OQT150-R101-2EP-IO-V31-IR
Pepperl OQT150-R101-2EP-IO-V31-IR
OQT150-R101-2EP-IO-V31-IR

Açıklama

Pepperl Fuchs OQT150-R101-2EP-IO-V31-IR Fotoelektrik Nirengi Sensör
Pepperl OQT150-R101-2EP-IO-V31-IR Photoelectric Triangulation Sensor
Fotoelektrik Sensör Pepperl Fuchs OQT150-R101-2EP-IO-V31-IR
Pepperl Fuchs OQT150-R101-2EP-IO-V31-IR Fotoelektrik Sensör
Triangulation Sensor OQT150-R101-2EP-IO-V31-IR Pepperl-Fuchs
Nirengi Sensör OQT150-R101-2EP-IO-V31-IR Pepperl-Fuchs

Teknik veriler OQT150-R101-2EP-IO-V31-IR

Ürün Açıklaması
Switching diffuse mode sensor with measurement core technology, 150 mm detection range, red light, IO-Link, 2 x push-pull output, M8 plug

 

General specifications
Detection range 5 … 150 mm
Detection range min. 5 … 20 mm
Detection range max. 5 … 150 mm
Adjustment range 20 … 150 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated infrared light 850 nm
LED risk group labelling exempt group
Black/White difference (6 %/90 %) < 5 % at 150 mm
Diameter of the light spot approx. 12 mm at a distance of 150 mm
Angle of divergence approx. 4.5 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd 600 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on – power on
flashing (4Hz) – short circuit
flashing with short break (1 Hz) – IO-Link mode
Function indicator LED yellow:
constantly on – switch output active
constantly off – switch output inactive
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage 10 … 30 V DC
Ripple max. 10 %
No-load supply current < 25 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Device profile Smart Sensor
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data witdh Process data input 2 Bit
Process data output 2 Bit
SIO mode support yes
Device ID 0x110807 (1116167)
Compatible master port type A
Output
Switching type The default setting is:
C/Q – Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 – Pin2: NPN normally open, PNP normally closed
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 217 Hz
Response time 2.3 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Approvals and certificates
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature -40 … 60 °C (-40 … 140 °F)
Storage temperature -40 … 70 °C (-40 … 158 °F)
Mechanical specifications
Housing width 13.9 mm
Housing height 41.4 mm
Housing depth 18.3 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g