Ürünler

Sensör Pepperl Fuchs
Endüktif Sensör Pepperl Fuchs NRB15-30GM50-A2-C
30 Ocak 2019
Sensör Pepperl Fuchs
Endüktif Sensör Pepperl Fuchs NRB15-30GS50-E2
30 Ocak 2019
Tümünü Göster

Endüktif Sensör Pepperl Fuchs NRB15-30GM50-E2-C-V1


Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NRB15-30GM50-E2-C-V1
Pepperl NRB15-30GM50-E2-C-V1
NRB15-30GM50-E2-C-V1

Açıklama

Pepperl Fuchs NRB15-30GM50-E2-C-V1 Endüktif Sensör
Pepperl NRB15-30GM50-E2-C-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NRB15-30GM50-E2-C-V1
Pepperl Fuchs NRB15-30GM50-E2-C-V1 Yakınlık Sensörü
Inductive Sensor NRB15-30GM50-E2-C-V1 Pepperl-Fuchs
Endüktif Sensör NRB15-30GM50-E2-C-V1 Pepperl-Fuchs

Teknik veriler NRB15-30GM50-E2-C-V1

General specifications
Switching function Normally open (NO)
Output type PNP
Rated operating distance 15 mm
Installation flush
Output polarity DC
Assured operating distance 0 … 12.15 mm
Reduction factor rAl 1
Reduction factor rCu 1
Reduction factor r304 1
Reduction factor rSt37 1
Output type 3-wire
Nominal ratings
Operating voltage 10 … 30 V DC
Switching frequency 0 … 750 Hz
Hysteresis typ. 3 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop ≤ 2 V
Rated insulation voltage 60 V
Operating current 0 … 200 mA
Off-state current 0 … 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current ≤ 14 mA
Time delay before availability max. 15 ms
Constant magnetic field 200 mT
Alternating magnetic field 200 mT
Switching state indicator Multihole-LED, yellow
Functional safety related parameters
MTTFd 1140.2 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class II
Rated insulation voltage 60 V
Rated impulse withstand voltage 800 V
UL approval cULus Listed, Type 1 enclosure
Class 2 power source
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 … 70 °C (-13 … 158 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection type Connector plug M12 x 1 , 4-pin
Housing material Brass, PTFE coated
Sensing face PPS
Degree of protection IP67
Mass 113 g
General information
Scope of delivery 2 self locking nuts in scope of delivery