Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NRB13-30GS50-E2-V1
Pepperl NRB13-30GS50-E2-V1
NRB13-30GS50-E2-V1
Pepperl Fuchs NRB13-30GS50-E2-V1 Endüktif Sensör
Pepperl NRB13-30GS50-E2-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NRB13-30GS50-E2-V1
Pepperl Fuchs NRB13-30GS50-E2-V1 Yakınlık Sensörü
Inductive Sensor NRB13-30GS50-E2-V1 Pepperl-Fuchs
Endüktif Sensör NRB13-30GS50-E2-V1 Pepperl-Fuchs
General specifications | ||
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 13 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 … 10.53 mm | |
Reduction factor rAl | 1 | |
Reduction factor rCu | 1 | |
Reduction factor r304 | 1 | |
Reduction factor rSt37 | 1 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 … 30 V DC | |
Switching frequency | 0 … 750 Hz | |
Hysteresis | typ. 3 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | ≤ 2 V | |
Rated insulation voltage | 60 V | |
Operating current | 0 … 200 mA | |
Off-state current | 0 … 0.5 mA typ. 0.1 µA at 25 °C | |
No-load supply current | ≤ 14 mA | |
Time delay before availability | max. 15 ms | |
Constant magnetic field | 200 mT | |
Alternating magnetic field | 200 mT | |
Switching state indicator | Multihole-LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1140.2 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
Approvals and certificates | ||
Protection class | II | |
Rated insulation voltage | 60 V | |
Rated impulse withstand voltage | 800 V | |
UL approval | cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 4-pin | |
Housing material | Stainless steel 1.4305 / AISI 303 | |
Sensing face | PBT | |
Degree of protection | IP67 | |
Mass | 113 g | |
General information | ||
Scope of delivery | 2 self locking nuts in scope of delivery |