Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NMB15-30GM65-E2-C-V1
Pepperl NMB15-30GM65-E2-C-V1
NMB15-30GM65-E2-C-V1
Pepperl Fuchs NMB15-30GM65-E2-C-V1 Endüktif Sensör
Pepperl NMB15-30GM65-E2-C-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NMB15-30GM65-E2-C-V1
Pepperl Fuchs NMB15-30GM65-E2-C-V1 Yakınlık Sensörü
Inductive Sensor NMB15-30GM65-E2-C-V1 Pepperl-Fuchs
Endüktif Sensör NMB15-30GM65-E2-C-V1 Pepperl-Fuchs
General specifications | |
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 15 mm |
Installation | flush (Requirements: see drawing below) |
Output polarity | DC |
Assured operating distance | 0 … 12.15 mm |
Actuating element | Ferrous and nonferrous targets |
Reduction factor rAl | 0.4 |
Reduction factor rCu | 0.2 |
Reduction factor r304 | 0.85 |
Reduction factor rSt37 | 1 |
Nominal ratings | |
Operating voltage | 10 … 30 V DC |
Switching frequency | 0 … 5 Hz |
Hysteresis | 3 … 15 typ. 10 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | ≤ 2 V |
Operating current | ≤ 200 mA |
Current consumption | ≤ 10 mA |
Off-state current | ≤ 10 µA |
No-load supply current | ≤ 15 mA |
Operating voltage indicator | LED, green |
Switching state indicator | Multihole-LED, yellow |
Mag. Field strength, AC fields | 250 mT |
Mag. Field strength, DC fields | 250 mT |
Functional safety related parameters | |
MTTFd | 884 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions | |
Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
Mechanical specifications | |
Connection type | Connector M12 x 1 , 4-pin |
Housing material | Xylan coated – Stainless steel 1.4305 / AISI 303 |
Sensing face | Xylan coated – Stainless steel 1.4305 / AISI 303 |
Housing diameter | 30 mm |
Degree of protection | IP67 / IP68 / IP69K – cordset dependent according to cable specification |