Ürünler
Endüktif Sensör Pepperl Fuchs NMB10-18GM55-Z9-C4-300MM-V1
29 Ocak 2019Endüktif Sensör Pepperl Fuchs NMB10-18GM65-E2-C-V1
29 Ocak 2019
Endüktif Sensör Pepperl Fuchs NMB10-18GM65-E0-V1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NNMB10-18GM65-E0-V1
Pepperl NMB10-18GM65-E0-V1
NMB10-18GM65-E0-V1
Açıklama
Pepperl Fuchs NMB10-18GM65-E0-V1 Endüktif Sensör
Pepperl NMB10-18GM65-E0-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NMB10-18GM65-E0-V1
Pepperl Fuchs NMB10-18GM65-E0-V1 Yakınlık Sensörü
Inductive Sensor NMB10-18GM65-E0-V1 Pepperl-Fuchs
Endüktif Sensör NMB10-18GM65-E0-V1 Pepperl-Fuchs
Teknik veriler NMB10-18GM65-E0-V1
| General specifications | |
| Switching function | Normally open (NO) |
| Output type | NPN |
| Rated operating distance | 10 mm |
| Installation | flush (Requirements: see drawing below) |
| Output polarity | DC |
| Assured operating distance | 0 … 8.1 mm |
| Actuating element | Ferrous and nonferrous targets |
| Reduction factor rAl | 0.4 |
| Reduction factor rCu | 0.25 |
| Reduction factor r304 | 0.85 |
| Reduction factor rSt37 | 1 |
| Nominal ratings | |
| Operating voltage | 10 … 30 V DC |
| Switching frequency | 0 … 240 Hz |
| Hysteresis | 3 … 15 typ. 10 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Operating current | ≤ 200 mA |
| Off-state current | 10 µA |
| No-load supply current | ≤ 10 mA |
| Operating voltage indicator | LED, green |
| Switching state indicator | LED, yellow |
| Approvals and certificates | |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions | |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Mechanical specifications | |
| Connection type | Connector M12 x 1 , 4-pin |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Housing diameter | 18 mm |
| Degree of protection | IP67 / IP68 / IP69K – cordset dependent according to cable specification |
