Ürünler
Endüktif Sensör Pepperl Fuchs NJ4-12GK-N-C92
28 Ocak 2019
Endüktif Sensör Pepperl Fuchs NJ40+U1+E2-T-V1
28 Ocak 2019
Endüktif Sensör Pepperl Fuchs NJ40+U1+E
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NJ40+U1+E
Pepperl NJ40+U1+E
NJ40+U1+E
Açıklama
Pepperl Fuchs NJ40+U1+E Endüktif Sensör
Pepperl NJ40+U1+E Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NJ40+U1+E
Pepperl Fuchs NJ40+U1+E Yakınlık Sensörü
Inductive Sensor NJ40+U1+E Pepperl-Fuchs
Endüktif Sensör NJ40+U1+E Pepperl-Fuchs
Teknik veriler NJ40+U1+E
| General specifications | ||
| Switching function | Normally open (NO) | |
| Output type | NPN | |
| Rated operating distance | 40 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 32.4 mm | |
| Actual operating distance | 36 … 44 mm typ. 40 mm | |
| Reduction factor rAl | 0.5 | |
| Reduction factor rCu | 0.45 | |
| Reduction factor r304 | 0.8 | |
| Nominal ratings | ||
| Operating voltage | 10 … 60 V | |
| Switching frequency | 0 … 100 Hz | |
| Hysteresis | 1 … 10 typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 2.8 V | |
| Voltage drop at IL | ||
| Voltage drop IL = 1 mA, switching element on | 0.5 … 2.3 V typ. 0.9 V | |
| Voltage drop IL = 10 mA, switching element on | 0.8 … 2.2 V typ. 1.4 V | |
| Voltage drop IL = 20 mA, switching element on | 0.9 … 2.3 V typ. 1.5 V | |
| Voltage drop IL = 50 mA, switching element on | 0.9 … 2.5 V typ. 1.6 V | |
| Voltage drop IL = 100 mA, switching element on | 1 … 2.6 V typ. 1.8 V | |
| Voltage drop IL = 200 mA, switching element on | 1.2 … 2.8 V typ. 2 V | |
| Operating current | 0 … 200 mA | |
| Off-state current | 0 … 0.5 mA typ. 0.01 mA | |
| Off-state current TU =40 °C, switching element off | ≤ 100 µA | |
| No-load supply current | ≤ 10 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP68 | |
