Ürünler
Endüktif Sensör Pepperl Fuchs NCN25-30GM50-Z7-V1
22 Ocak 2019
Endüktif Sensör Pepperl Fuchs NCN25-F35-A2-250-V1
22 Ocak 2019
Endüktif Sensör Pepperl Fuchs NCN25-F35-A2-250-15M-V1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NCN25-F35-A2-250-15M-V1
Pepperl NCN25-F35-A2-250-15M-V1
NCN25-F35-A2-250-15M-V1
Açıklama
Pepperl Fuchs NCN25-F35-A2-250-15M-V1 Endüktif Sensör
Pepperl NCN25-F35-A2-250-15M-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NCN25-F35-A2-250-15M-V1
Pepperl Fuchs NCN25-F35-A2-250-15M-V1 Yakınlık Sensörü
Inductive Sensor NCN25-F35-A2-250-15M-V1 Pepperl-Fuchs
Endüktif Sensör NCN25-F35-A2-250-15M-V1 Pepperl-Fuchs
Teknik veriler NCN25-F35-A2-250-15M-V1
| General specifications | |
| Switching function | complementary |
| Output type | PNP |
| Rated operating distance | 25 mm |
| Installation | flush mountable |
| Output polarity | DC |
| Assured operating distance | 0 … 20 mm |
| Reduction factor rAl | 0.5 |
| Reduction factor rCu | 0.5 |
| Reduction factor r304 | 0.6 … 1 |
| Mounting angle | Al |
| Amplifier housing | Stainless steel |
| Nominal ratings | |
| Operating voltage | 10 … 30 V |
| Switching frequency | 0 … 20 Hz |
| Hysteresis | 0.3 … 5 typ. 2 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 3 V |
| Operating current | 0 … 200 mA |
| No-load supply current | ≤ 25 mA |
| Switching state indicator | Multihole-LED, yellow |
| Functional safety related parameters | |
| MTTFd | 7515 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates | |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions | |
| Ambient temperature | 0 … 250 °C (32 … 482 °F) |
| Mechanical specifications | |
| Connection type | Connector M12 x 1 , 4-pin |
| Cable version | PFA cable, with armour of stainless steel |
| Core cross-section | 3 x 0.34 , screened |
| Housing material | PTFE / Al / 1.4305 / AISI 303 |
| Sensing face | PTFE |
| Degree of protection | amplifier IP67 sensor IP40 |
| Cable length | L = 15 m |
| Note | – amplifier 0 °C … 70 °C – r1.4305 dep. on thickness of measurement plate d: r1.4305 = 1 for d < 1mm Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection. |
