Ürünler
Endüktif Sensör Pepperl Fuchs NBN40-L2-A2-V1
19 Ocak 2019
Endüktif Sensör Pepperl Fuchs NBN5-11K8-N-V8
19 Ocak 2019
Endüktif Sensör Pepperl Fuchs NBN40-L2-A2-V1-3G-3D
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBN40-L2-A2-V1-3G-3D
Pepperl NBN40-L2-A2-V1-3G-3D
NBN40-L2-A2-V1-3G-3D
Açıklama
Pepperl Fuchs NBN40-L2-A2-V1-3G-3D Endüktif Sensör
Pepperl NBN40-L2-A2-V1-3G-3D Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBN40-L2-A2-V1-3G-3D
Pepperl Fuchs NBN40-L2-A2-V1-3G-3D Yakınlık Sensörü
Inductive Sensor NBN40-L2-A2-V1-3G-3D Pepperl-Fuchs
Endüktif Sensör NBN40-L2-A2-V1-3G-3D Pepperl-Fuchs
Teknik veriler NBN40-L2-A2-V1-3G-3D
| General specifications | ||
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 40 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 32.4 mm | |
| Actual operating distance | 36 … 44 mm | |
| Reduction factor rAl | 0.31 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.74 | |
| Reduction factor rBrass | 0.39 | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Operating voltage | 10 … 30 V DC | |
| Switching frequency | 0 … 180 Hz | |
| Hysteresis | typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 2 V | |
| Operating current | 0 … 200 mA | |
| Off-state current | 0 … 0.5 mA | |
| No-load supply current | ≤ 20 mA | |
| Time delay before availability | 80 ms | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 1057 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| Protection class | II | |
| Rated insulation voltage | 253 V | |
| Rated impulse withstand voltage | 4000 V | |
| UL approval | cULus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 85 °C (-13 … 185 °F) | |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | PA | |
| Sensing face | PA | |
| Degree of protection | IP69K | |
| Mass | 130 g | |
| Data for application in connection with hazardous areas | ||
| Equipment protection level | Gc (nA) , Dc | |
| Equipment protection level Gc (nA) | ||
| Type of protection | “n” | |
| CE marking | [*PD-Z02586A*] | |
| Certificates | ||
| ATEX certificate | PF15CERT3754X | |
| ATEX marking | II 3G Ex nA IIC T6 Gc | |
| Standards | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
| Possible characteristics | maximum operating voltage UBmax , maximum load current ILmax , minimum series resistance RV , maximum analog output voltage UAmax , maximum analog output current IAmax | |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at UBmax = 30 V , IL = 200 mA : 48 °C (118.4 °F) at UBmax = 30 V , IL = 100 mA : 50 °C (122 °F) at UBmax = 30 V , IL = 50 mA : 51 °C (123.8 °F) at UBmax = 30 V , IL = 25 mA : 52 °C (125.6 °F) |
|
| Equipment protection level Dc | ||
| Type of protection | Protection by enclosure “tc” | |
| CE marking | [*PD-Z02586A*] | |
| Certificates | ||
| ATEX certificate | PF15CERT3774X | |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc | |
| Standards | EN 60079-0:2012+A11:2013 , EN 60079-31:2014 | |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at UBmax = 30 V , IL = 200 mA : 48 °C (118.4 °F) at UBmax = 30 V , IL = 100 mA : 50 °C (122 °F) at UBmax = 30 V , IL = 50 mA : 51 °C (123.8 °F) at UBmax = 30 V , IL = 25 mA : 52 °C (125.6 °F) |
|
| General information | ||
| Use in the hazardous area | see instruction manuals | |
