Ürünler
Endüktif Sensör Pepperl Fuchs NBN30-U1-A2-M
2 Şubat 2019Endüktif Sensör Pepperl Fuchs NBN30-U1-A2-T-V1
2 Şubat 2019
Endüktif Sensör Pepperl Fuchs NBN30-U1-A2-T
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBN30-U1-A2-T
Pepperl NBN30-U1-A2-T
NBN30-U1-A2-T
Açıklama
Pepperl Fuchs NBN30-U1-A2-T Endüktif Sensör
Pepperl NBN30-U1-A2-T Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBN30-U1-A2-T
Pepperl Fuchs NBN30-U1-A2-T Yakınlık Sensörü
Inductive Sensor NBN30-U1-A2-T Pepperl-Fuchs
Endüktif Sensör NBN30-U1-A2-T Pepperl-Fuchs
Teknik veriler NBN30-U1-A2-T
| General specifications | |
| Rated operating distance | 30 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 … 24.3 mm |
| Reduction factor rAl | 0.33 |
| Reduction factor rCu | 0.31 |
| Reduction factor r304 | 0.74 |
| Reduction factor rBrass | 0.38 |
| Output type | 4-wire |
| Nominal ratings | |
| Operating voltage | 10 … 30 V |
| Switching frequency | 0 … 230 Hz |
| Hysteresis | typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Operating current | 0 … 200 mA |
| Off-state current | 0 … 0.5 mA |
| No-load supply current | ≤ 20 mA |
| Operating voltage indicator | LED, green |
| Switching state indicator | LED, yellow |
| Functional safety related parameters | |
| MTTFd | 1230 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates | |
| EAC conformity | TR CU 020/2011 |
| UL approval | cULus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions | |
| Ambient temperature | -25 … 100 °C (-13 … 212 °F) |
| Mechanical specifications | |
| Connection type | screw terminals |
| Core cross-section | max. 2.5 mm2 |
| Housing material | PA/metal with epoxy powder coating |
| Sensing face | PA |
| Degree of protection | IP68 / IP69K |
| Mass | 225 g |
| Note | Tightening torque: 1.8 Nm (housing) Tightening torque: 1.0 Nm (Screw terminal) |
