Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB20-L2-B3B-V1
Pepperl NBB20-L2-B3B-V1
NBB20-L2-B3B-V1
Pepperl Fuchs NBB20-L2-B3B-V1 Endüktif Sensör
Pepperl NBB20-L2-B3B-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB20-L2-B3B-V1
Pepperl Fuchs NBB20-L2-B3B-V1 Yakınlık Sensörü
Inductive Sensor NBB20-L2-B3B-V1 Pepperl-Fuchs
Endüktif Sensör NBB20-L2-B3B-V1 Pepperl-Fuchs
General specifications | |
Switching function | Normally open/closed (NO/NC) programmable |
Output type | AS-Interface |
Rated operating distance | 20 mm |
Installation | flush |
Assured operating distance | 0 … 16.2 mm |
Reduction factor rAl | 0.33 |
Reduction factor rCu | 0.31 |
Reduction factor r304 | 0.74 |
Reduction factor rBrass | 0.41 |
Slave type | A/B slave |
AS-Interface specification | V3.0 |
Required master specification | ≥ V2.1 |
Nominal ratings | |
Operating voltage | 26.5 … 31.9 V via AS-i bus system |
Switching frequency | 0 … 150 Hz |
Hysteresis | typ. 5 % |
Reverse polarity protection | reverse polarity protected |
No-load supply current | ≤ 40 mA |
Operating voltage indicator | LED, green |
Switching state indicator | LED, yellow |
Error indicator | LED, red |
Functional safety related parameters | |
MTTFd | 1330 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions | |
Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
Storage temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical specifications | |
Connection type | Connector M12 x 1 , 4-pin |
Housing material | PA |
Sensing face | PA |
Degree of protection | IP69K |
Mass | 130 g |