Ürünler
Endüktif Sensör Pepperl Fuchs NBB15-30GM50-EI-V1
22 Aralık 2018Endüktif Sensör Pepperl Fuchs NBB15-30GM50-UO
24 Aralık 2018
Endüktif Sensör Pepperl Fuchs NBB15-30GM50-EI-V1-M1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB15-30GM50-EI-V1-M1
Pepperl NBB15-30GM50-EI-V1-M1
NBB15-30GM50-EI-V1-M1
Açıklama
Pepperl Fuchs NBB15-30GM50-EI-V1-M1 Endüktif Sensör
Pepperl NBB15-30GM50-EI-V1-M1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB15-30GM50-EI-V1-M1
Pepperl Fuchs NBB15-30GM50-EI-V1-M1 Yakınlık Sensörü
Inductive Sensor NBB15-30GM50-EI-V1-M1 Pepperl-Fuchs
Endüktif Sensör NBB15-30GM50-EI-V1-M1 Pepperl-Fuchs
Teknik veriler NBB15-30GM50-EI-V1-M1
| General specifications | ||
| Output type | Digital current output | |
| Rated operating distance | 15 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 12.15 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 45 mm x 45 mm x 1 mm |
|
| Reduction factor rAl | 0.5 | |
| Reduction factor rCu | 0.4 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.5 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 9 … 30 V DC | |
| Switching frequency | 0 … 700 Hz | |
| Hysteresis | 2 … 15 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | yes | |
| Temperature drift | ≤ 10 % | |
| Time delay before availability | ≤ 5 ms | |
| Load resistor | 100 … 250 Ohm | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 1556 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Digital output | ||
| Output type | object detected: 10 mA ± 1 mA object not detected: 5 mA ± 1 mA |
|
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| E1 Type approval | 10R-04 | |
| Ambient conditions | ||
| Ambient temperature | -40 … 85 °C (-40 … 185 °F) | |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP68 / IP69K | |
| Mass | 150 g | |
| General information | ||
| Scope of delivery | 2 self locking nuts in scope of delivery | |
