Ürünler
Endüktif Sensör Pepperl Fuchs NBB15-30GKK-WO
17 Aralık 2018
Endüktif Sensör Pepperl Fuchs NBB15-30GM30-E2
17 Aralık 2018
Endüktif Sensör Pepperl Fuchs NBB15-30GKK-WS
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB15-30GKK-WS
Pepperl NBB15-30GKK-WS
NBB15-30GKK-WS
Açıklama
Pepperl Fuchs NBB15-30GKK-WS Endüktif Sensör
Pepperl NBB15-30GKK-WS Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB15-30GKK-WS
Pepperl Fuchs NBB15-30GKK-WS Yakınlık Sensörü
Inductive Sensor NBB15-30GKK-WS Pepperl-Fuchs
Endüktif Sensör NBB15-30GKK-WS Pepperl-Fuchs
Teknik veriler NBB15-30GKK-WS
| General specifications | |
| Switching function | Normally open (NO) |
| Output type | Two-wire |
| Rated operating distance | 15 mm |
| Installation | flush |
| Output polarity | AC |
| Assured operating distance | 0 … 12.15 mm |
| Reduction factor rAl | 0.33 |
| Reduction factor rCu | 0.28 |
| Reduction factor r304 | 0.82 |
| Nominal ratings | |
| Operating voltage | 20 … 250 V |
| Switching frequency | 0 … 20 Hz |
| Hysteresis | typ. 5 % |
| Short-circuit protection | no |
| Voltage drop | ≤ 8 V |
| Momentary current (20 ms, 0.1 Hz) |
0 … 1600 mA |
| Operating current | 1.5 … 200 mA |
| No-load supply current | ≤ 1.7 mA |
| Approvals and certificates | |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Ambient conditions | |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Mechanical specifications | |
| Connection type | terminal compartment |
| Core cross-section | up to 2.5 mm2 |
| Housing material | PBT |
| Sensing face | PBT |
| Housing diameter | 30 mm |
| Degree of protection | IP67 |
| Note | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80…253 V Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
