Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB10-30GM50-WO-V93
Pepperl NBB10-30GM50-WO-V93
NBB10-30GM50-WO-V93
Pepperl Fuchs NBB10-30GM50-WO-V93 Endüktif Sensör
Pepperl NBB10-30GM50-WO-V93 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB10-30GM50-WO-V93
Pepperl Fuchs NBB10-30GM50-WO-V93 Yakınlık Sensörü
Inductive Sensor NBB10-30GM50-WO-V93 Pepperl-Fuchs
Endüktif Sensör NBB10-30GM50-WO-V93 Pepperl-Fuchs
General specifications | |
Switching function | Normally closed (NC) |
Output type | Two-wire |
Rated operating distance | 10 mm |
Installation | flush |
Output polarity | AC |
Assured operating distance | 0 … 8.1 mm |
Actual operating distance | 9 … 11 mm |
Reduction factor rAl | 0.33 |
Reduction factor rCu | 0.28 |
Reduction factor r304 | 0.81 |
Output type | 2-wire |
Nominal ratings | |
Operating voltage | 20 … 253 V |
Switching frequency | 0 … 20 Hz |
Hysteresis | typ. 5 % |
Reverse polarity protection | reverse polarity tolerant |
Voltage drop | < 5 V (IL > 50 mA); < 8 V (IL < 50 mA) |
Momentary current (20 ms, 0.1 Hz) |
0 … 1600 mA |
Operating current | 5 … 200 mA |
Off-state current | 0 … 1.7 mA |
Operating voltage indicator | LED, green |
Switching state indicator | LED, yellow |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | Certified by China Compulsory Certification (CCC) |
Ambient conditions | |
Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
Mechanical specifications | |
Connection type | Connector 7/8 inch-16 UN , 3-pin |
Housing material | brass, nickel-plated |
Sensing face | PBT |
Degree of protection | IP67 |
Note | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80…253 V Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |