Ürünler
Endüktif Sensör Pepperl Fuchs NBB10-30GK50-E2-10M
16 Ocak 2019
Endüktif Sensör Pepperl Fuchs NBB10-30GKK-WS
16 Ocak 2019
Endüktif Sensör Pepperl Fuchs NBB10-30GKK-WO
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB10-30GKK-WO
Pepperl NBB10-30GKK-WO
NBB10-30GKK-WO
Açıklama
Pepperl Fuchs NBB10-30GKK-WO Endüktif Sensör
Pepperl NBB10-30GKK-WO Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB10-30GKK-WO
Pepperl Fuchs NBB10-30GKK-WO Yakınlık Sensörü
Inductive Sensor NBB10-30GKK-WO Pepperl-Fuchs
Endüktif Sensör NBB10-30GKK-WO Pepperl-Fuchs
Teknik veriler NBB10-30GKK-WO
| General specifications | |
| Switching function | Normally closed (NC) |
| Output type | Two-wire |
| Rated operating distance | 10 mm |
| Installation | flush |
| Output polarity | AC |
| Assured operating distance | 0 … 8.1 mm |
| Reduction factor rAl | 0.33 |
| Reduction factor rCu | 0.28 |
| Reduction factor r304 | 0.82 |
| Nominal ratings | |
| Operating voltage | 20 … 250 V |
| Switching frequency | 0 … 20 Hz |
| Hysteresis | typ. 5 % |
| Short-circuit protection | no |
| Voltage drop | ≤ 8 V |
| Momentary current (20 ms, 0.1 Hz) |
0 … 1600 mA |
| Operating current | 1.5 … 200 mA |
| No-load supply current | ≤ 1.7 mA |
| Approvals and certificates | |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Ambient conditions | |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Mechanical specifications | |
| Connection type | terminal compartment |
| Core cross-section | up to 2.5 mm2 |
| Housing material | PBT |
| Sensing face | PBT |
| Housing diameter | 30 mm |
| Degree of protection | IP67 |
| Note | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80…253 V Safety fuse ≤ 0.8 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
