Ürünler
Reflektörlü Tip Fotoelektrik Sensör Pepperl Fuchs ML100-54-F/103/115
2 Ocak 2019
Reflektörlü Tip Fotoelektrik Sensör Pepperl Fuchs ML100-54-F/25/102/115/154
2 Ocak 2019
Reflektörlü Tip Fotoelektrik Sensör Pepperl Fuchs ML100-54-F/103/115b
Sensör
Fotoelektrik Sensör
Retroreflective Sensor
Reflektörlü Tip Fotoelektrik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Retroreflective Sensor
Pepperl Fuchs Reflektörlü Tip Fotoelektrik Sensör
Pepperl Fuchs ML100-54-F/103/115b
Pepperl ML100-54-F/103/115b
ML100-54-F/103/115b
Açıklama
Pepperl Fuchs ML100-54-F/103/115b Reflektörlü Tip Fotoelektrik Sensör
Pepperl ML100-54-F/103/115b Retroreflective Sensor
Fotoelektrik Sensör Pepperl Fuchs ML100-54-F/103/115b
Pepperl Fuchs ML100-54-F/103/115b Fotoelektrik Sensör
Retroreflective Sensor ML100-54-F/103/115b Pepperl-Fuchs
Reflektörlü Tip Fotoelektrik Sensör ML100-54-F/103/115b Pepperl-Fuchs
Teknik veriler ML100-54-F/103/115b
| Ürün Açıklaması |
| Retroreflective sensor with polarization filter, plastic housing, 3 m detection range, red light, sensitivity adjuster, light/dark on, DC version, PNP output, fixed cable with M12 plug |
| General specifications | ||
| Effective detection range | 0 … 2.7 m | |
| Reflector distance | 0.02 … 2.7 m | |
| Threshold detection range | 3 m | |
| Reference target | H50 reflector | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Polarization filter | yes | |
| Diameter of the light spot | approx. 200 mm at a distance of 3 m | |
| Angle of divergence | approx. 4 ° | |
| Optical face | frontal | |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 | |
| Functional safety related parameters | ||
| MTTFd | 860 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: power on | |
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted | |
| Control elements | sensitivity adjustment | |
| Control elements | Light-on/dark-on changeover switch | |
| Electrical specifications | ||
| Operating voltage | 10 … 30 V DC | |
| Ripple | max. 10 % | |
| No-load supply current | < 20 mA | |
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: light on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 1000 Hz | |
| Response time | 0.5 ms | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 | |
| Standard conformity | ||
| Standards | UL 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 … 60 °C (-22 … 140 °F) | |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) | |
| Mechanical specifications | ||
| Housing width | 11 mm | |
| Housing height | 31 mm | |
| Housing depth | 20 mm | |
| Degree of protection | IP67 | |
| Connection | 300 mm fixed cable with 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
| Mass | approx. 20 g | |
| Tightening torque, fastening screws | 0.6 Nm | |
| Cable length | 0.3 m | |
