Ürünler
Manyetik Alan Sensörü Pepperl Fuchs MJ35-F12-1N
8 Aralık 2018
Manyetik Alan Sensörü Pepperl Fuchs MMB60-12GH50-E2-V1
8 Aralık 2018
Manyetik Alan Sensörü Pepperl Fuchs MJ35-F12-1N-5M
Sensör
Manyetik Alan Sensörü
Magnetic Field Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Manyetik Alan Sensörü
Pepperl Fuchs Magnetic Field Sensor
Pepperl Fuchs MJ35-F12-1N-5M
Pepperl MJ35-F12-1N-5M
MJ35-F12-1N-5M
Açıklama
Pepperl Fuchs MJ35-F12-1N-5M Manyetik Alan Sensörü
Pepperl MJ35-F12-1N-5M Magnetic Field Sensor
Yaklaşım Sensörü Pepperl Fuchs MJ35-F12-1N-5M
Pepperl Fuchs MJ35-F12-1N-5M Yakınlık Sensörü
Magnetic Field Sensor MJ35-F12-1N-5M Pepperl-Fuchs
Manyetik Alan Sensörü MJ35-F12-1N-5M Pepperl-Fuchs
Teknik veriler MJ35-F12-1N-5M
| General specifications | ||
| Switching function | 2 x normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 35 mm | |
| Installation | flush | |
| Assured operating distance | 0 … 35 mm | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 … 1000 Hz | |
| Current consumption | ||
| Magnet detected | ≥ 3 mA | |
| Magnet not detected | ≤ 1 mA | |
| Switching state indicator | LED, yellow | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| FM approval | ||
| Control drawing | 116-0165 | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 5 m | |
| Core cross-section | 0.34 mm2 | |
| Housing material | anodized aluminum | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 2G Ex ib IIC T6 Gb | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection “Intrinsic safety” Use is restricted to the following stated conditions |
|
| Appropriate type | MJ35-F12-1N 5M | |
| Effective internal capacitance | max. 15 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 35 µH ; a cable length of 10 m is considered. | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 2G | |
