Sensör
Fotoelektrik Sensör
Thru-beam Sensor
Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Thru-beam Sensor
Pepperl Fuchs Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs M100/MV100-IR/95/120/154
Pepperl M100/MV100-IR/95/120/154
M100/MV100-IR/95/120/154
Pepperl Fuchs M100/MV100-IR/95/120/154 Karşılıklı Tip Fotoelektrik Sensör
Pepperl M100/MV100-IR/95/120/154 Thru-beam Sensor
Fotoelektrik Sensör Pepperl Fuchs M100/MV100-IR/95/120/154
Pepperl Fuchs M100/MV100-IR/95/120/154 Fotoelektrik Sensör
Thru-beam Sensor M100/MV100-IR/95/120/154 Pepperl-Fuchs
Karşılıklı Tip Fotoelektrik Sensör M100/MV100-IR/95/120/154 Pepperl-Fuchs
Ürün Açıklaması |
Thru-beam sensor, 15 m detection range, infrared light, light/dark on, DC version, PNP output, sensitivity adjuster, emitter switch-off, M8 plug |
System components | ||
Emitter | M100-IR/95 | |
Receiver | MV100-IR/95/120/154 | |
General specifications | ||
Effective detection range | 0 … 15 m | |
Threshold detection range | 20 m | |
Light source | LED | |
Light type | modulated infrared light | |
Diameter of the light spot | approx. 1.5 m at a distance of 20 m | |
Angle of divergence | approx. 2 ° | |
Optical face | frontal | |
Ambient light limit | EN 60947-5-2 | |
Functional safety related parameters | ||
MTTFd | 860 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green: power on | |
Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted | |
Electrical specifications | ||
Operating voltage | 10 … 30 V DC | |
Ripple | max. 10 % | |
No-load supply current | Emitter: ≤ 15 mA Receiver: ≤ 8 mA |
|
Output | ||
Switching type | The default setting is: /Q – pin2: light on Q – pin4: dark on | |
Signal output | 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector | |
Switching voltage | max. 30 V DC | |
Switching current | max. 100 mA , resistive load | |
Voltage drop | ≤ 1.5 V DC | |
Switching frequency | 250 Hz | |
Response time | 2 ms | |
Compliance with standards and directives | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 | |
Standard conformity | ||
Standards | UL 60947-5-2 | |
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
UN/ECE Regulation No. 10 (E1) | Type-approval number: 047350 | |
Ambient conditions | ||
Ambient temperature | -40 … 60 °C (-40 … 140 °F) | |
Storage temperature | -40 … 70 °C (-40 … 158 °F) | |
Mechanical specifications | ||
Housing width | 11 mm | |
Housing height | 31 mm | |
Housing depth | 20 mm | |
Degree of protection | IP67 | |
Connection | M8 x 1 connector, 4-pin | |
Material | ||
Housing | PC (Polycarbonate) | |
Optical face | PMMA | |
Mass | approx. 20 g (emitter and receiver) | |
Tightening torque, fastening screws | 0.6 Nm |