Ürünler

Pepperl Fuchs Ultrasonic Sensor
Karşılıklı Tip Fotoelektrik Sensör Pepperl Fuchs BB10-P/59/76b/103/115e
21 Aralık 2018
Pepperl Ultrasonik Sensörler
Karşılıklı Tip Fotoelektrik Sensör Pepperl Fuchs E18/EV18-LAS/32/59/76a/92
21 Aralık 2018
Tümünü Göster

Karşılıklı Tip Fotoelektrik Sensör Pepperl Fuchs E18-LAS/EV18-LAS/25/32/76a/92


Sensör
Fotoelektrik Sensör
Thru-beam Sensor
Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Thru-beam Sensor
Pepperl Fuchs Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs E18-LAS/EV18-LAS/25/32/76a/92
Pepperl E18-LAS/EV18-LAS/25/32/76a/92
E18-LAS/EV18-LAS/25/32/76a/92

Açıklama

Pepperl Fuchs E18-LAS/EV18-LAS/25/32/76a/92 Karşılıklı Tip Fotoelektrik Sensör
Pepperl E18-LAS/EV18-LAS/25/32/76a/92 Thru-beam Sensor
Fotoelektrik Sensör Pepperl Fuchs E18-LAS/EV18-LAS/25/32/76a/92
Pepperl Fuchs E18-LAS/EV18-LAS/25/32/76a/92 Fotoelektrik Sensör
Thru-beam Sensor E18-LAS/EV18-LAS/25/32/76a/92 Pepperl-Fuchs
Karşılıklı Tip Fotoelektrik Sensör E18-LAS/EV18-LAS/25/32/76a/92 Pepperl-Fuchs

Teknik veriler E18-LAS/EV18-LAS/25/32/76a/92

Ürün Açıklaması
Laser thru-beam sensor, M18 threaded housing design, metal housing, front optical face, 10 m detection range, red light, light on, DC version, PNP output, test input, M12 plug

 

System components
Emitter E18-LAS/92
Receiver EV18-LAS/32/92
General specifications
Effective detection range 0 … 10 m
Threshold detection range 18 m
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM
Laser class 1
Wave length 650 nm
Beam divergence 1 mrad
Pulse length 15 µs
Repetition rate 10 kHz
max. pulse energy < 10.2 nJ
Target size 1.2 mm
Light receiver photo diode
Diameter of the light spot approx. 2 mm at detection range 1.5 m
Angle of divergence Receiver +/-2°
Optical face frontal
Ambient light limit
Continuous light 5000 Lux
Hysteresis 25 %
Functional safety related parameters
MTTFd 208.3 a
Mission Time (TM) 7 a
Diagnostic Coverage (DC) 60 %
Indicators/operating means
Function indicator LED yellow, lights up when light beam is free, flashes when falling short of the stability control
Electrical specifications
Operating voltage 10 … 30 V DC
Ripple 10 %
No-load supply current emitter ≤ 25 mA , receiver ≤ 60 mA
Input
Test input Emitter deactivation
emitter on: 0 … +3V
emitter off: +5V … +UB
Output
Pre-fault indication output PNP, open collector , short-circuit protected
inactive: signal strength > approx. 30 % of the strength with clean optic
active: signal strength < approx. 30 % of the strength with clean optic
Switching type light on
Signal output 1 PNP, short-circuit protected, open collector
Switching voltage max. 30 V DC
Switching current max. 100 mA
Switching frequency 1000 Hz
Response time 0.5 ms
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 60947-5-2:2007
Standard conformity
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Shock and impact resistance IEC / EN 60068, half-sine, 30 g in X, Y and Z direction
Vibration resistance IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Laser class IEC 60825-1:2007
EN 60825-1:2007
Approvals and certificates
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature 0 … 50 °C (32 … 122 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Degree of protection IP65
Connection 4-pin, M12 x 1 connector
Material
Housing brass, nickel-plated
Optical face glass
Connector metal
Mass Per 45 g