Ürünler
Kapasitif Sensör Pepperl Fuchs CJ40-FP-A0-P1
14 Aralık 2018
Kapasitif Sensör Pepperl Fuchs CJ40-FP-A2-P4
14 Aralık 2018
Kapasitif Sensör Pepperl Fuchs CJ40-FP-A2-P1
Sensör
Yakınlık Sensörü
Proximity Sensor
Kapasitif Proximity Sensör
Capacitive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Kapasitif Proximity Sensör
Pepperl Fuchs Capacitive Proximity Sensor
Pepperl Fuchs CJ40-FP-A2-P1
Pepperl CJ40-FP-A2-P1
CJ40-FP-A2-P1
Açıklama
Pepperl Fuchs CJ40-FP-A2-P1 Kapasitif Sensör
Pepperl CJ40-FP-A2-P1 Capacitive Sensor
Yaklaşım Sensörü Pepperl Fuchs CJ40-FP-A2-P1
Pepperl Fuchs CJ40-FP-A2-P1 Yakınlık Sensörü
Capacitive Sensor CJ40-FP-A2-P1 Pepperl-Fuchs
Kapasitif Sensör CJ40-FP-A2-P1 Pepperl-Fuchs
Teknik veriler CJ40-FP-A2-P1
| General specifications | ||
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 40 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 32.4 mm | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Installation conditions | ||
| B | 40 mm | |
| C | 80 mm | |
| F | 120 mm | |
| Operating voltage | 10 … 60 V DC | |
| Switching frequency | 0 … 10 Hz | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 2.8 V | |
| Operating current | 0 … 200 mA | |
| No-load supply current | ≤ 20 mA | |
| Switching state indicator | LED, yellow | |
| Indicators/operating means | ||
| Potentiometer | sensitivity adjustment | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT/POM | |
| Sensing face | POM | |
| Housing base | PBT | |
| Degree of protection | IP65 | |
