Sensör
Fotoelektrik Sensör
Thru-beam Sensor
Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Thru-beam Sensor
Pepperl Fuchs Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs BB10-P-F1-6118/35/59/103/115e
Pepperl BB10-P-F1-6118/35/59/103/115e
BB10-P-F1-6118/35/59/103/115e
Pepperl Fuchs BB10-P-F1-6118/35/59/103/115e Karşılıklı Tip Fotoelektrik Sensör
Pepperl BB10-P-F1-6118/35/59/103/115e Thru-beam Sensor
Fotoelektrik Sensör Pepperl Fuchs BB10-P-F1-6118/35/59/103/115e
Pepperl Fuchs BB10-P-F1-6118/35/59/103/115e Fotoelektrik Sensör
Thru-beam Sensor BB10-P-F1-6118/35/59/103/115e Pepperl-Fuchs
Karşılıklı Tip Fotoelektrik Sensör BB10-P-F1-6118/35/59/103/115e Pepperl-Fuchs
Ürün Açıklaması |
Miniature photoelectric sensor with plug-in style housing for mounting in 13 mm hole |
System components | ||
Emitter | BB10-T-F1-6118/115e | |
Receiver | BB10-R-F1/35/59/103/115e | |
General specifications | ||
Effective detection range | 0 … 2 m | |
Threshold detection range | 2.5 m | |
Light source | IRED | |
Light type | modulated infrared light , 880 nm | |
Diameter of the light spot | approx. 250 mm at a distance of 2 m | |
Angle of divergence | Emitter: +/- 3 ° Receiver: +/- 10 ° at max. sensing range ; typical | |
Optical face | frontal | |
Ambient light limit | halogen light 100000 Lux ; according to EN 60947-5-2:2007 | |
Accessories provided | none | |
Functional safety related parameters | ||
MTTFd | 795 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Function indicator | LED red: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted | |
Electrical specifications | ||
Operating voltage | 10 … 30 V DC | |
No-load supply current | Emitter: ≤ 20 mA Receiver: ≤ 10 mA |
|
Input | ||
Test input | emitter deactivation at 0 V | |
Output | ||
Switching type | dark on | |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
Switching voltage | max. 30 V DC | |
Switching current | max. 100 mA | |
Voltage drop | ≤ 1.5 V DC | |
Switching frequency | 100 Hz | |
Response time | 5 ms | |
Compliance with standards and directives | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2:2007 | |
Standard conformity | ||
Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
Approvals and certificates | ||
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -40 … 60 °C (-40 … 140 °F) , fixed -20 … 60 °C (-4 … 140 °F) , movable |
|
Storage temperature | -40 … 70 °C (-40 … 158 °F) | |
Relative humidity | 90 % , noncondensing | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | 0.15 m cable with 3-pin JST connector Receiver: grey ; Emitter: black | |
Material | ||
Housing | PC , black | |
Optical face | Plastic pane | |
Mass | approx. 25 g per device |