Panel
Operatör Panel
Dokunmatik Panel
Dokunmatik Operatör Panel
Mitsubishi
Mitsubishi Panel
Mitsubishi Operatör Panel
Mitsubishi Dokunmatik Panel
Mitsubishi Dokunmatik Operatör Panel
Mitsubishi HMI
Mitsubishi E1071
Mitsubishi E1071 Dokunmatik Panel
Mitsubishi E1071 Dokunmatik Operatör Panel
Mitsubishi E1071 Operator Interface Panel
Technical Data
Parameter E1071
Front panel, W x H x D 219 x 154 x 6 mm
Mounting depth 55 mm (155 mm including clearance)
Front panel seal IP 66
Rear panel seal IP 20
Keyboard material/
Front panel
Touch screen: Polyester on glass *, 1 million finger touch
operations.
Overlay: Autotex F250 *.
Reverse side material Powder-coated aluminum
Weight 1.1 kg
Serial port RS422/
RS485
25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC.
Serial port RS232C 9-pin D-sub contact, male with standard locking screws 4-40
UNC.
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500mA
Device type B (USB 1.1)
CF-slot Compact flash, type I and II
Flash memory for
application
12 MB (incl. fonts)
Real time clock ±20 PPM + error because of ambient temperature and supply
voltage.
Total max error: 1 min/month at 25 °C
Minimum life of the real time clock battery: 3 years
Temperature coefficient: 0.004 ppm/°C2
Power consumption at
rated voltage
Normal: 0.4 A
Maximum: 0.9 A
Display TFT-LCD. 640 x 480 pixels, 64K color.
CCFL backlight lifetime at the ambient temperature of
+25 °C: >50,000 h.
Active area of display,
W x H
131.5 x 98.6 mm
Fuse Internal DC fuse, 3.15 AT, 5 x 20 mm
Power supply +24V DC (20 – 30V DC). 3-pin jack connection block.
CE: The power supply must conform with the requirements
for SELV or PELV according to IEC 950 or IEC 742.
UL: The power supply must conform with the requirements
for class II power supplies.
Ambient temperature Vertical installation: 0 ° to +50 °C
Horizontal installation: 0 ° to +40 °C
Storage temperature -20 ° to +70 °C
Relative humidity 5 – 85 % non-condensed
EMC tests on the
operator terminal
The operator terminal conforms with the essential protection
requirements in article 4 of the directive 89/336/EEC. Noise
tested according to EN61000-6-4 emission and EN61000-6-2
immunity.
UL, cUL approvals
(when procuct or
packing is marked)
UL 1604 Class I, Div 2 / UL 508 / UL 50 4x indoor use only
DNV Yes
NEMA 4x indoor use only