Ürünler
Kapasitif Sensör Pepperl Fuchs CJ10-30GM-WS
13 Aralık 2018Kapasitif Sensör Pepperl Fuchs CJ15+U4+A2
14 Aralık 2018
Kapasitif Sensör Pepperl Fuchs CJ15+U1+A2
Sensör
Yakınlık Sensörü
Proximity Sensor
Kapasitif Proximity Sensör
Capacitive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Kapasitif Proximity Sensör
Pepperl Fuchs Capacitive Proximity Sensor
Pepperl Fuchs CJ15+U1+A2
Pepperl CJ15+U1+A2
CJ15+U1+A2
Açıklama
Pepperl Fuchs CJ15+U1+A2 Kapasitif Sensör
Pepperl CJ15+U1+A2 Capacitive Sensor
Yaklaşım Sensörü Pepperl Fuchs CJ15+U1+A2
Pepperl Fuchs CJ15+U1+A2 Yakınlık Sensörü
Capacitive Sensor CJ15+U1+A2 Pepperl-Fuchs
Kapasitif Sensör CJ15+U1+A2 Pepperl-Fuchs
Teknik veriler CJ15+U1+A2
| General specifications | ||
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 15 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 10.8 mm | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Installation conditions | ||
| B | 15 mm | |
| C | 30 mm | |
| F | 80 mm | |
| Operating voltage | 10 … 30 V DC | |
| Switching frequency | 0 … 10 Hz | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 … 200 mA | |
| No-load supply current | ≤ 20 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 750 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP65 | |
| Note | Tightening torque: 1.8 Nm (housing) | |
