Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB10-30GM50-WS-10M
Pepperl NBB10-30GM50-WS-10M
NBB10-30GM50-WS-10M
Pepperl Fuchs NBB10-30GM50-WS-10M Endüktif Sensör
Pepperl NBB10-30GM50-WS-10M Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB10-30GM50-WS-10M
Pepperl Fuchs NBB10-30GM50-WS-10M Yakınlık Sensörü
Inductive Sensor NBB10-30GM50-WS-10M Pepperl-Fuchs
Endüktif Sensör NBB10-30GM50-WS-10M Pepperl-Fuchs
General specifications | |
Switching function | Normally open (NO) |
Output type | Two-wire |
Rated operating distance | 10 mm |
Installation | flush |
Output polarity | AC |
Assured operating distance | 0 … 8.1 mm |
Actual operating distance | 9 … 11 mm |
Reduction factor rAl | 0.33 |
Reduction factor rCu | 0.28 |
Reduction factor r304 | 0.81 |
Nominal ratings | |
Operating voltage | 20 … 253 V |
Switching frequency | 0 … 20 Hz |
Hysteresis | typ. 5 % |
Voltage drop | < 5 V (IL > 50 mA); < 8 V (IL < 50 mA) |
Momentary current (20 ms, 0.1 Hz) |
0 … 1600 mA |
Operating current | 5 … 200 mA |
Off-state current | 0 … 1.7 mA |
Operating voltage indicator | LED, green |
Switching state indicator | LED, yellow |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | Certified by China Compulsory Certification (CCC) |
Ambient conditions | |
Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
Mechanical specifications | |
Connection type | cable PVC , 10 m |
Cable version | PA |
Core cross-section | 0.75 mm2 |
Housing material | brass, nickel-plated |
Sensing face | PBT |
Housing diameter | 30 mm |
Degree of protection | IP67 |
Note | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80…253 V Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |