Ürünler

Pepperl Ultrasonik Sensörler
Ultrasonik Sensör Pepperl Fuchs UB6000-F42-E7-V15
4 Aralık 2018
Ultrasonic Sensor Pepperl Fuchs
Ultrasonik Sensör Pepperl Fuchs UB6000-F42-I-V15
4 Aralık 2018
Tümünü Göster

Ultrasonik Sensör Pepperl Fuchs UB6000-F42-I-V1-Y220443


Sensör
Ultrasonic Sensor
Ultrasonik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Ultrasonic Sensor
Pepperl Fuchs Ultrasonik Sensör
Pepperl Fuchs UB6000-F42-I-V1-Y220443
Pepperl UB6000-F42-I-V1-Y220443

Açıklama

Pepperl Fuchs UB6000-F42-I-V1-Y220443 Ultrasonik Sensör
Pepperl UB6000-F42-I-V1-Y220443 Ultrasonic Sensor

Teknik veriler UB6000-F42-I-V1-Y220443

Ürün Açıklaması
Single head system

 

General specifications
Measurement range 400 … 6000 mm
Sensing range 350 … 6000 mm
Dead band 0 … 350 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 65 kHz
Response delay approx. 650 ms
Indicators/operating means
LED green Power on
LED yellow object in evaluation range
LED red error
Electrical specifications
Operating voltage 10 … 30 V DC , ripple 10 %SS
No-load supply current ≤ 60 mA
Input/Output
Synchronization bi-directional
0 level -UB…+1 V
1 level: +4 V…+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
Common mode operation max. 7 Hz
Multiplex operation ≤ 7/n Hz, n = number of sensors
Output
Output type 1 analog output 4 … 20 mA
Resolution 0.7 mm
Deviation of the characteristic curve ± 1 % of full-scale value
Repeat accuracy ± 0.1 % of full-scale value
Load impedance 0 … 300 Ohm
Temperature influence ± 1 % of full-scale value
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 … 70 °C (-13 … 158 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 4-pin
Degree of protection IP67
Connection 4-pin, M12 x 1 connector
Material
Housing ABS
Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT
Mass 330 g