Sensör
Ultrasonic Sensor
Ultrasonik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Ultrasonic Sensor
Pepperl Fuchs Ultrasonik Sensör
Pepperl Fuchs UB3000-F42-UK-V95
Pepperl UB3000-F42-UK-V95
Pepperl Fuchs UB3000-F42-UK-V95 Ultrasonik Sensör
Pepperl UB3000-F42-UK-V95 Ultrasonic Sensor
Technical data of UB3000-F42-UK-V95
Product Description |
Single head system |
General specifications | ||
Sensing range | 200 … 3000 mm | |
Adjustment range | 240 … 3000 mm | |
Dead band | 0 … 200 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 85 kHz | |
Response delay | approx. 325 ms | |
Indicators/operating means | ||
LED green | solid green: Power on | |
LED yellow | solid: switching state switch output flashing: program function |
|
LED red | normal operation: “fault” program function: no object detected |
|
Electrical specifications | ||
Fusing | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. | |
Operating voltage | 22 … 253 V AC/DC | |
No-load supply current | ≤ 60 mA | |
Output | ||
Output type | 1 relay output | |
Rated operating current | 3 A | |
Repeat accuracy | ≤ 0.5 % of switching point | |
Switching frequency | ≤ 1.5 Hz | |
Range hysteresis | 1 % of the set operating distance | |
Temperature influence | ± 1 % of full-scale value | |
Approvals and certificates | ||
EAC conformity | TR CU 004/2011 TR CU 020/2011 |
|
Ambient conditions | ||
Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP65 | |
Connection | 5-pin V95 connector (7/8″-16 UN 2A) | |
Material | ||
Housing | PBT | |
Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | |
Mass | 260 g |