Ürünler
Endüktif Sensör Pepperl Fuchs NRN75-FP-A2-C-P3-V1
1 Şubat 2019Endüktif Sensör Pepperl Fuchs NRN75-FP-A2-P3-V1
1 Şubat 2019
Endüktif Sensör Pepperl Fuchs NRN75-FP-A2-P3
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NRN75-FP-A2-P3
Pepperl NRN75-FP-A2-P3
NRN75-FP-A2-P3
Açıklama
Pepperl Fuchs NRN75-FP-A2-P3 Endüktif Sensör
Pepperl NRN75-FP-A2-P3 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NRN75-FP-A2-P3
Pepperl Fuchs NRN75-FP-A2-P3 Yakınlık Sensörü
Inductive Sensor NRN75-FP-A2-P3 Pepperl-Fuchs
Endüktif Sensör NRN75-FP-A2-P3 Pepperl-Fuchs
Teknik veriler NRN75-FP-A2-P3
| General specifications | ||
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 75 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 55 mm | |
| Reduction factor rAl | 1 | |
| Reduction factor rCu | 1 | |
| Reduction factor r304 | 1 | |
| Reduction factor rSt37 | 1 | |
| Nominal ratings | ||
| Operating voltage | 10 … 30 V DC | |
| Switching frequency | 0 … 50 Hz | |
| Hysteresis | typ. 3 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Rated insulation voltage | 50 V | |
| Operating current | 0 … 200 mA | |
| Off-state current | 0 … 0.5 mA | |
| No-load supply current | ≤ 20 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 824 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | 0 … 50 °C (32 … 122 °F) (± 10 % changing operating distance) -25 … 70 °C (-13 … 158 °F) (± 20 % changing operating distance) |
|
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP68 | |
