Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NMN20-18GH50-E2-V1
Pepperl NMN20-18GH50-E2-V1
NMN20-18GH50-E2-V1
Pepperl Fuchs NMN20-18GH50-E2-V1 Endüktif Sensör
Pepperl NMN20-18GH50-E2-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NMN20-18GH50-E2-V1
Pepperl Fuchs NMN20-18GH50-E2-V1 Yakınlık Sensörü
Inductive Sensor NMN20-18GH50-E2-V1 Pepperl-Fuchs
Endüktif Sensör NMN20-18GH50-E2-V1 Pepperl-Fuchs
General specifications | ||
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 20 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 … 16.2 mm | |
Reduction factor rAl | 1 | |
Reduction factor rCu | 0.9 | |
Reduction factor r304 | 0.3 (0.6 of material thickness 2 mm) | |
Reduction factor rSt37 | 1 | |
Output type | 3-wire | |
Nominal ratings | ||
Installation conditions | ||
A | 34 mm (mild steel) 36 mm (stainless steel) 20 mm (aluminum) 22 mm (brass) |
|
B | 41 mm | |
C | 60 mm | |
F | 200 mm | |
Operating voltage | 10 … 30 V | |
Switching frequency | 0 … 200 Hz | |
Hysteresis | 3 … 15 typ. 5 % | |
Reverse polarity protection | yes | |
Short-circuit protection | yes | |
Voltage drop | ≤ 2 V | |
Operating current | 0 … 200 mA | |
Off-state current | ≤ 0.1 mA | |
No-load supply current | ≤ 10 mA | |
Switching state indicator | LED, yellow | |
Limit data | ||
Operating pressure statically | 60 bar (870.2 psi) max. | |
Functional safety related parameters | ||
MTTFd | 655 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -25 … 85 °C (-13 … 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 4-pin | |
Housing material | Stainless steel 1.4435 / AISI 316L | |
Sensing face | Stainless steel 1.4435 / AISI 316L | |
Degree of protection | IP68 / IP69K | |
Mass | 24 g |