Ürünler
Endüktif Sensör Pepperl Fuchs NEN10-12GM50-E3
24 Ocak 2019Endüktif Sensör Pepperl Fuchs NEN20-18GM50-E0
24 Ocak 2019
Endüktif Sensör Pepperl Fuchs NEN10-12GM50-E3-V1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NEN10-12GM50-E3-V1
Pepperl NEN10-12GM50-E3-V1
NEN10-12GM50-E3-V1
Açıklama
Pepperl Fuchs NEN10-12GM50-E3-V1 Endüktif Sensör
Pepperl NEN10-12GM50-E3-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NEN10-12GM50-E3-V1
Pepperl Fuchs NEN10-12GM50-E3-V1 Yakınlık Sensörü
Inductive Sensor NEN10-12GM50-E3-V1 Pepperl-Fuchs
Endüktif Sensör NEN10-12GM50-E3-V1 Pepperl-Fuchs
Teknik veriler NEN10-12GM50-E3-V1
| General specifications | ||
| Switching function | Normally closed (NC) | |
| Output type | PNP | |
| Rated operating distance | 10 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 8.1 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 30 mm x 30 mm x 1 mm |
|
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.4 | |
| Reduction factor r304 | 0.75 | |
| Reduction factor rBrass | 0.45 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Installation conditions | ||
| A | in steel 1.0037 (St37): 10 mm | |
| B | 12 mm | |
| C | 30 mm | |
| F | 42 mm | |
| Operating voltage | 10 … 30 V | |
| Switching frequency | 0 … 600 Hz | |
| Hysteresis | 0.06 … 1 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | pulsing | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | ≤ 2 V | |
| Repeat accuracy | 0.3 mm | |
| Operating current | 0 … 200 mA , above 70°C max. 150 mA | |
| Off-state current | ≤ 10 µA | |
| No-load supply current | ≤ 15 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2650 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 85 °C (-13 … 185 °F) | |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 4-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mass | 20 g | |
| Tightening torque, fastening screws | max. 10 Nm | |
