Ürünler

Ultrasonic Sensor Pepperl Fuchs
Endüktif Sensör Pepperl Fuchs NBB20-L3M-US-V93
14 Ocak 2019
Pepperl Fuchs Ultrasonic Sensor
Endüktif Sensör Pepperl Fuchs NBB20-U1-A0-M
14 Ocak 2019
Tümünü Göster

Endüktif Sensör Pepperl Fuchs NBB20-U1-A0


Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB20-U1-A0
Pepperl NBB20-U1-A0
NBB20-U1-A0

Açıklama

Pepperl Fuchs NBB20-U1-A0 Endüktif Sensör
Pepperl NBB20-U1-A0 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB20-U1-A0
Pepperl Fuchs NBB20-U1-A0 Yakınlık Sensörü
Inductive Sensor NBB20-U1-A0 Pepperl-Fuchs
Endüktif Sensör NBB20-U1-A0 Pepperl-Fuchs

Teknik veriler NBB20-U1-A0

General specifications
Switching function complementary
Output type NPN
Rated operating distance 20 mm
Installation flush
Output polarity DC
Assured operating distance 0 … 16.2 mm
Reduction factor rAl 0.33
Reduction factor rCu 0.31
Reduction factor r304 0.74
Reduction factor rBrass 0.41
Output type 4-wire
Nominal ratings
Operating voltage 10 … 30 V DC
Switching frequency 0 … 440 Hz
Hysteresis typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop ≤ 2 V
Operating current 0 … 200 mA
Off-state current 0 … 0.5 mA
No-load supply current ≤ 20 mA
Time delay before availability 80 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1230 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 … 85 °C (-13 … 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm2
Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material PA/metal with epoxy powder coating
Sensing face PA
Housing base plastic
Degree of protection IP68 / IP69K
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)